Verified, Certified, and Locally Trusted
reviews
Trusted by Austin Homeowners When It Matters Most
A damaged home means strangers working inside rooms that are already torn apart, so trust matters. Austin Painting & Drywall is BBB accredited and commercially insured, OSHA 10/30 training covers every employee, subcontractor, and manager, and one full-time project manager stays on your job from walkthrough to final coat of paint.
What Water Mitigation Services in Austin TX Actually Cover
Water mitigation is the full sequence of work that happens after your home takes on water. It starts with getting the water out and ends with your walls, ceilings, and trim looking the way they did before the damage. That includes extraction, structural drying, removing drywall and insulation that absorbed too much moisture to salvage, hanging and finishing new drywall, and repainting every surface the water touched.
Most contractors handle one piece of this. A restoration company dries the structure and walks away. A drywall crew comes in later. Then you're calling a painter. Each handoff adds time, cost, and the chance that something gets missed. Water mitigation done under one roof means one crew, one timeline, and one person accountable for the finished result.
services we offer
What Your Water Mitigation Project Includes
Every water mitigation job follows the same progression. Water comes out first, then the structure dries, then damaged materials get stripped and replaced. Here are the six services that make up that work, each one managed by the same crew from start to finish.
Water Extraction
Standing water is the first thing that has to go. Whether it's pooled on the floor, trapped under baseboards, or sitting behind cabinets, it all gets pulled before anything else can start. The faster extraction happens, the less damage soaks into the materials around it. Your extraction is handled on-site by the crew so there's no waiting on a third party to show up and start.
Structural Drying and Dehumidifying
Once the visible water is out, the moisture trapped inside walls, subfloors, and framing has to come down to safe levels. Drying equipment runs continuously until moisture readings confirm the structure is where it needs to be. Skipping this step or cutting it short is how hidden damage turns into a bigger problem six months later.
Burst Pipe, Leak, and Flood Damage
Pipes burst. Supply lines fail. Storms push water where it doesn't belong. Each source leaves a different kind of mess. A slow leak behind a bathroom wall might damage drywall in a small area but go unnoticed for weeks. A burst pipe can flood an entire floor in hours. The crew adjusts the scope based on where the water came from, how long it sat, and what it reached.
Saturated Drywall Removal and Replacement
Drywall that has absorbed water past a certain point can't dry and recover. It loses structural integrity, starts to sag, and creates conditions you don't want inside your walls. Saturated sections get cut out, the framing behind them dries fully, and new drywall goes up in its place. Joints are taped, mudded, and finished flush with the surrounding wall so the repair blends in.
Wet Insulation Replacement
Insulation holds moisture like a sponge. Once it's saturated, it stops insulating and starts holding water against surfaces that need to dry. Wet insulation gets removed so the structure behind it can dry properly. Fresh insulation goes in after the framing passes moisture checks. Leaving it in place is one of the most common shortcuts that leads to long-term problems.
Repainting and Finish Restoration
The last step is making the repaired areas look like they were never damaged. That means primer, paint, and trim work on every surface that was opened up during the job. Because the same company that hung the new drywall is also painting it, there's no gap in quality between the repair and the finish. The wall gets treated as one continuous job, not a handoff between two different crews.
If your home has taken on water and you're not sure what needs to happen next, call (512) 993-0948. The crew will walk the damage with you and lay out the full scope before any work starts.
problems we solved
Common Water Damage Problems and How They Get Resolved
Not every water problem looks the same when a homeowner finds it. Here are six situations the crew walks into regularly and what the resolution looks like.
Drywall that's soft, bubbling, or discolored after a leak
The visible damage is usually smaller than the actual spread. Opening the wall reveals the full extent. Everything saturated gets removed, the framing dries, and new drywall goes up to match the surrounding surface.
Water pooling on floors after a pipe burst
Time matters here. Standing water gets extracted first, affected baseboards come off, and drying equipment starts running before the subfloor soaks through.
Persistent musty smell in a room with no visible damage
There's moisture behind something. It might be a slow leak inside a wall cavity or wet insulation that never dried from a previous incident. The crew finds the source, pulls the affected material, dries the structure, and seals it back up.
Ceiling stains from an upstairs bathroom or roof leak
Water travels along framing and surfaces before it shows. The stain you see on the ceiling may be several feet from the actual entry point. Tracing it back and replacing the compromised drywall with a clean, finished surface is how the repair actually holds.
Flooding that reached cabinets, trim, and lower walls
Floodwater doesn't respect boundaries. Baseboards, cabinet toe kicks, and lower drywall sections all absorb water and need attention. Everything the water touched gets stripped, dried, and rebuilt.
Prior water damage repair that wasn't done right
If the last contractor painted over wet drywall or left soaked insulation in place, the problem didn't go away. It just got hidden. The fix means opening it up, doing the work that should've been done the first time, and putting it back together correctly.
who we are
About Austin Painting and Drywall
2018
Building Since
200+
Projects Completed
25+
Services Offered
Austin Painting and Drywall is a locally owned company built on three connected trades: painting, drywall, and the finish work that ties them together. Owner Travis Hawk spent ten years as an insurance adjuster before starting this company. That background means the damage assessment isn't guesswork. He's seen what happens when water sits too long, when contractors cut corners, and when repairs get signed off before the structure is actually dry.
When your home takes on water, the rebuild is the part that either makes the damage disappear or reminds you of it every time you walk past the wall. That's the work this company was built for. The extraction and drying get your home safe. The drywall, the mudding, the painting, and the trim work get it back to looking right.
proudly local
Serving Austin TX and Surrounding Communities
Central Texas storms can drop heavy rain fast, and a leak or a roof breach doesn’t wait for a convenient time. Austin Painting & Drywall works across Travis and Williamson counties, including North Austin, Allandale, and Barton Creek, and a project manager walks the damage with you before any work is scoped.
If water has already reached your walls, floors, or ceiling, call (512) 993-0948 to schedule a walkthrough. The crew will confirm coverage for your address and lay out what needs to happen.
warranty
Our Warranty on Water Mitigation Work
Water damage repair should close the chapter on a bad situation. Austin Painting & Drywall puts the warranty terms in writing, and you keep that document. Warranty service starts with your call: if a covered issue shows up, call (512) 993-0948.
3 yr
Paint warranty Covers the paint applied to every repaired surface.
2 yr
New sheetrock warranty Applies to drywall replaced after the water damage.
2+ yr
Workmanship guarantee Stands behind the rebuild work from tear-out to final coat.
Water Mitigation Services in Austin TX: Common Questions
Get Water Mitigation Services in Austin TX
Water damage doesn't stop spreading on its own. Every hour it sits, it reaches further into your walls, your floors, and the materials that hold your home together. If you're dealing with a burst pipe, storm damage, or a leak that got out of hand, call (512) 993-0948 to schedule a walkthrough. The crew will document the damage, lay out the full scope, and get your home back to where it was.
