expert in commercial
Acoustic Ceiling in Austin, TX
The ceiling is the largest unbroken surface in most commercial rooms, and it sets how the space sounds and how finished it looks. A sagging tile, a crooked grid, or the wrong acoustic rating drags the whole room down with it.
Verified, Certified, and Locally Trusted
reviews
The Ceiling Is the One Surface Every Person in the Room Sees From Every Seat
A bad ceiling can’t hide. Stained tiles, a grid that’s out of level, or seams that don’t line up are visible from every angle in the room. That visibility is why it matters who installs it. Austin Painting & Drywall is BBB accredited, commercially insured, and puts employees, subcontractors, and managers through OSHA 10/30 training. The ceiling grid and tiles are inspected for level, alignment, and acoustic performance before the project manager signs off on the room.
Acoustic Ceiling in Austin, TX for Offices, Medical, Retail, and Industrial Spaces
Sound in a commercial room bounces off hard surfaces. Without an acoustic ceiling to absorb and contain it, conversations carry, phone calls echo, and HVAC noise travels from one end of the building to the other. The right ceiling system controls that sound while giving the room a clean, finished look that holds up to daily use.
Austin Painting & Drywall installs suspended acoustic ceiling systems, drop ceilings, acoustic tile, specialty panels, and sound-rated ceiling assemblies for commercial buildings. The crew handles everything from a standard 2x4 lay-in grid for a 50-room office floor to a custom acoustic panel layout for a recording studio or conference center. Tile material, NRC rating, grid profile, and ceiling height are all selected based on the room's acoustic requirements, the code, and the look the space needs.
Ceiling work ties directly into the trades around it. The metal stud framing and wall insulation have to be done before the ceiling grid goes in. The drywall at the wall-to-ceiling joint has to meet the grid clean. And if the walls are getting painted, that work is sequenced so overspray doesn't land on finished ceiling tiles. The crew coordinates all of it under one contract. If the project also includes floor coatings, those trades are scheduled around the ceiling work so nothing gets damaged after it's installed.
services we offer
What Acoustic Ceiling Work Covers, From Grid Layout to Final Tile
The right ceiling system depends on the room's purpose, the acoustic target, the building's mechanical layout above the grid, and the look the space needs. These are the six ceiling services the crew handles.
Suspended Ceiling Grid Installation
New T-bar grid systems hung from the structure above and leveled across the room. The crew installs main runners, cross tees, wall molding, and suspension wire at the spacing and height the ceiling plan calls for. Grid layout is set so tiles are symmetrical in the room, with border tiles cut to equal widths on opposite walls.
Acoustic Ceiling Tile Installation
Mineral fiber, fiberglass, and composite acoustic tiles installed in the suspended grid. Tile selection is based on the room's NRC (Noise Reduction Coefficient) target, the CAC (Ceiling Attenuation Class) requirement for sound privacy between rooms, fire rating, light reflectance, and humidity resistance.
Drop Ceiling Replacement and Upgrades
Existing drop ceilings stripped down to the suspension wire and rebuilt with new grid and tile. The crew removes old, stained, sagging, or damaged tiles and the grid they sit in. If the suspension wires and hanger connections are still sound, the new grid is built on the existing support structure.
Sound-Rated Ceiling Assemblies
Ceiling systems engineered for specific acoustic performance targets in rooms where sound control is critical. Medical exam rooms, conference rooms, law offices, recording studios, and multi-tenant suite separations each have different acoustic requirements.
Specialty Acoustic Panels and Baffles
Vertical acoustic baffles, hanging panels, and wall-mounted acoustic absorbers for open-plan offices, restaurants, gyms, worship spaces, and any room where a standard lay-in tile grid isn't the right fit.
Ceiling Grid Repair and Tile Replacement
Damaged, water-stained, sagging, or broken ceiling tiles and grid components replaced without removing the entire ceiling. The crew matches the existing tile size, color, edge profile, and grid system so the repaired area blends with the rest of the ceiling. If water damage caused the problem, the crew traces the source, makes sure the leak is repaired, and replaces the affected tiles and any grid sections that corroded or warped.
Need an acoustic ceiling for your commercial space? Call (512) 993-0948 or fill out the online form with the building address and scope. A project manager will schedule a site visit.
problems we solved
Ceiling Problems That Make a Commercial Space Look and Sound Wrong
A ceiling that's failing shows it in two ways: the room sounds worse, and the room looks worse. Stained tiles, a sagging grid, and echo that makes a conference call impossible are all signs the ceiling needs work. These are the six ceiling problems the crew gets called to fix.
Water-Stained Tiles That Nobody Replaced After the Leak.
A roof leak or a pipe burst above the ceiling soaked the tiles, and the tiles were never swapped out. Brown stains spread across mineral fiber, and the tiles sag where the water weight stretched them.
A Grid That's Out of Level or Sagging Between Supports.
Suspension wires spaced too far apart, hanger connections that slipped, or an original install that was never leveled correctly leave a ceiling that visibly dips and rolls.
Echo and Noise That Make Conference Rooms Unusable.
The ceiling tiles have a low NRC rating, or the original builder installed a standard tile where an acoustic tile was needed. Phone calls echo, conversations carry, and background HVAC noise fills the room.
Tiles Around Light Fixtures and Diffusers That Are Cut Poorly.
Tiles hacked with a utility knife leave rough edges, oversized gaps, and visible backing around light fixtures, sprinkler heads, and HVAC diffusers.
Drop Ceiling Installed Too Low, Blocking Access to MEP Equipment.
The original ceiling was hung at a height that doesn't leave room to service the ductwork, plumbing, or electrical above it. Maintenance crews have to remove multiple tiles and grid sections every time they need access, and the tiles never go back in right.
Acoustic Ceiling That Doesn't Meet Code for the Current Occupancy.
The building changed use or the tenant improvement triggered a new code review. The existing ceiling tiles don't meet the fire rating, the acoustic performance target, or the accessibility requirements for the updated occupancy type.
who we are
Acoustic Ceiling Work Is a Core Trade Here, Not a Side Job Handed to a Sub
2018
Building Since
200+
Projects Completed
25+
Services Offered
Some painting and drywall companies offer ceiling work because a customer asked, and they figure it out on the job. Austin Painting & Drywall built acoustic ceiling installation into the business from the start, with its own crew, its own project manager, and the same insurance that covers the rest of the work.
The reasoning is straightforward. The framing crew builds the walls, the insulation crew fills the cavities, the drywall crew finishes the surfaces, and the acoustic ceiling crew closes the room from above. If those four trades come from four contractors, the wall-to-ceiling joint is the seam where they all have to line up and usually don’t. Keeping the ceiling under the same contract means the grid meets the drywall at a clean, level line and nobody walks off before the room is finished.
Austin Painting & Drywall covers Travis and Williamson counties for acoustic ceiling work. The project manager assigned to your ceiling job carries it through every trade that follows.
proudly local
Installing Acoustic Ceilings in Commercial Spaces Across the Austin Metro
Commercial spaces across the metro need ceiling systems that handle both sound and appearance. Older buildings with original drop ceilings have tiles that are stained, sagging, or acoustically inadequate for today's use. New builds need the ceiling done right the first time so tenants move in to a space that sounds as good as it looks. Office parks and medical corridors along I-35 in Round Rock have exam rooms and conference rooms where acoustic performance is a tenant requirement, not a luxury. Tech and light-industrial buildings expanding along 130 in Pflugerville need ceiling systems that control noise in open-plan offices and shared work environments. And boutique commercial and restaurant spaces in Lakeway expect a ceiling that looks as considered as the rest of the interior.
Austin Painting & Drywall covers Travis and Williamson counties for acoustic ceiling work. If your building is in the metro and you're not sure about coverage, call (512) 993-0948 and the project manager will confirm and schedule a site visit.
warranty
A Written Warranty on the Ceiling That Covers Every Square Foot of the Room
Walls and ceilings take daily wear, from scuffs to afternoon sun, so a finish needs backing after the crew leaves. Austin Painting & Drywall puts the terms in writing, and you keep that document. Warranty service starts with your call: if a covered issue shows up, call (512) 993-0948.
3 yr
On all paint, interior and exterior surfaces finished as part of the project.
2 yr
On new drywall hung, finished, and painted by the crew.
2+ yr
Workmanship guarantee covering every trade on the job, acoustic ceiling included.
Frequently Asked Questions About Acoustic Ceiling in Austin, TX
Ready for an Acoustic Ceiling in Austin, TX That Sounds Right and Looks Right?
Your ceiling project starts with one site visit and one written scope. Call (512) 993-0948 or fill out the online form with your building details, and a project manager will meet you on site to review the plenum, the grid layout, and every room that needs a ceiling.
