expert in commercial
Commercial Insulation in Austin, TX
The insulation behind your walls and ceilings controls two things: how much energy the building loses, and how much sound carries between rooms. Commercial insulation in Austin TX from Austin Painting & Drywall covers spray foam, batt and blanket, rigid board, blown-in, and acoustic insulation for offices, retail, medical suites, and warehouses, installed after framing and before the drywall closes the cavity.
Verified, Certified, and Locally Trusted
reviews
The Work Inside the Wall Cavity Is the Work Nobody Checks Twice
Insulation goes into the wall before the drywall covers it. Once the board is hung, nobody opens the cavity to see whether the batts are compressed, the spray foam filled the voids, or the rigid board is seated tight against the studs. Austin Painting & Drywall is BBB accredited and commercially insured, and every employee, subcontractor, and manager holds OSHA 10/30 training. The insulation work is inspected by the project manager before any drywall is hung over it, because the only time to catch a gap is before the cavity disappears.
Commercial Insulation in Austin TX for Offices, Retail, Medical, and Industrial Spaces
Every commercial building in Central Texas has an energy envelope, and that envelope is only as good as the insulation behind the walls and above the ceilings. Under-insulated buildings lose conditioned air through every gap in the cavity, and the HVAC system runs harder to compensate. Over time, that shows up in utility costs that climb year after year and tenant complaints about rooms that won't hold temperature.
Austin Painting & Drywall installs five types of commercial insulation based on the wall assembly, the code requirements, and what the space needs to do. Spray foam for airtight coverage in irregular cavities. Batt and blanket for standard stud walls where thermal and acoustic performance need to hit a specific R-value. Rigid foam board for continuous exterior insulation and foundation walls. Blown-in for retrofits and ceiling cavities where access is limited. And acoustic insulation for walls between offices, conference rooms, exam rooms, and any space where sound transmission matters.
The crew handles insulation as part of a full interior build-out that includes metal stud framing, commercial drywall, and commercial painting. If your project also needs floor coatings or acoustic ceiling work, those trades are sequenced around the insulation and drywall schedule so every cavity is filled before the board covers it.
services we offer
What Commercial Insulation Covers, From Spray Foam to Full Cavity Replacement
The right insulation type depends on the wall assembly, the cavity depth, the R-value the code requires, and whether the wall needs acoustic separation or fire-rated performance. These are the six insulation services the crew handles.
Spray Foam Insulation
Closed-cell and open-cell spray foam applied directly into wall cavities, rim joists, and irregular spaces where batt insulation can't make full contact with every surface. Closed-cell spray foam adds structural rigidity and acts as both a thermal barrier and a vapor retarder. Open-cell foam fills large cavities at a lower cost and provides strong acoustic dampening. The crew applies spray foam after framing and MEP rough-in are complete and before drywall follows.
Batt and Blanket Insulation
Fiberglass and mineral wool batts cut to fit standard stud cavities at 16-inch and 24-inch spacing. Batt insulation is the most common thermal and acoustic fill for interior partition walls, exterior walls, and ceiling cavities in commercial buildings. Mineral wool batts also carry fire resistance ratings that contribute to the overall fire-rated assembly performance. The crew installs batts friction-fit with no compression, no gaps at the edges, and no voids behind electrical boxes or plumbing penetrations.
Insulation Removal and Replacement
Old, damaged, water-saturated, or code-deficient insulation stripped out of wall and ceiling cavities and replaced with new material that meets current thermal and acoustic standards. The crew removes the existing drywall where needed, pulls the old insulation, inspects the cavity for moisture damage or mold, and installs the replacement material before closing the wall back up. If the framing behind the insulation is damaged, the crew handles that repair as part of the same project.
Rigid Foam Board Insulation
Extruded polystyrene (XPS), expanded polystyrene (EPS), and polyisocyanurate boards installed as continuous insulation on exterior walls, below-grade foundation walls, and roof assemblies. Rigid board insulation breaks the thermal bridge that metal studs create in exterior walls, providing an uninterrupted layer of insulation across the entire wall surface.
Blown-In and Loose-Fill Insulation
Cellulose and fiberglass loose-fill insulation blown into enclosed ceiling cavities, attic spaces, and existing wall cavities where access doesn't allow batt installation. Blown-in insulation fills around obstructions like wiring, plumbing, and HVAC ductwork that batt insulation would have to be cut around.
Sound and Acoustic Insulation
Mineral wool and specialized acoustic batts installed in walls between offices, conference rooms, medical exam rooms, hotel rooms, and any spaces where sound transmission needs to stay below a specific STC (Sound Transmission Class) rating. Acoustic insulation works inside the wall cavity to absorb sound energy before it passes through the drywall on the other side.
Need insulation for your commercial project? Call (512) 993-0948 or fill out the online form with the building address and scope. A project manager will schedule a site visit.
problems we solved
Insulation Problems That Show Up in Utility Bills and Tenant Complaints
Bad insulation doesn't announce itself the way a cracked wall or a peeling coat of paint does. It shows up slowly: utility costs that creep upward, rooms that never hold temperature, and walls that let every phone call through to the next office. These are the six insulation problems the crew gets called to diagnose and fix.
Rooms That Won't Hold Temperature No Matter What the Thermostat Says.
The HVAC runs constantly, and the room is still too warm in summer and too cold in winter. Missing insulation, compressed batts, or gaps around penetrations let conditioned air escape through the wall cavity. The crew opens the wall, identifies the voids, and fills every gap so the envelope actually holds temperature the way it should have from the start.
Utility Costs That Climb Every Year Without an Obvious Cause.
The building hasn't changed, but the energy bill keeps going up. Insulation that's settled, degraded, or was under-spec from the original build-out loses R-value over time. The crew inspects the wall and ceiling cavities, identifies the material that's failing, removes it, and installs replacement insulation at the R-value the building needs to perform efficiently.
Sound Bleeding Between Offices and Exam Rooms.
Conversations carry through the wall. Phone calls are audible in the next suite. The insulation in the wall cavity is either the wrong type for acoustic performance, the wrong thickness, or it was never installed in the first place. The crew opens the wall, installs mineral wool or acoustic batts sized to hit the STC target the space requires, and closes the wall back up with properly sealed drywall.
Condensation or Moisture Inside Wall Cavities.
When warm, humid air reaches a cold surface inside the wall, moisture condenses on the studs and the back of the drywall. Over time, that moisture damages the insulation, grows mold, and weakens the drywall paper face. The crew removes the wet insulation, treats any mold, and installs new insulation with the correct vapor control for the wall assembly so the problem doesn't come back.
Insulation That Was Compressed During the Original Install.
Batt insulation shoved into a cavity that's too narrow or pushed behind a pipe loses R-value at the compression point. The thermal performance the spec sheet promises only holds when the batt sits at its full designed thickness. The crew replaces compressed batts with material cut to fit the actual cavity depth, or switches to spray foam in tight spots where batts can't maintain full loft.
Code-Deficient Insulation in Older Commercial Buildings.
Older buildings were built to the energy code that applied when they were constructed. Tenant improvements and major renovations trigger updated code requirements, and the existing insulation often falls short of the current R-value minimums. The crew removes the old material and installs insulation that brings the building up to the current code, which reduces energy costs and satisfies the building inspector at the same time.
who we are
A Full Interior Build-Out Crew, Not an Insulation-Only Subcontractor
2018
Building Since
200+
Projects Completed
25+
Services Offered
Most insulation contractors show up, fill the cavities, and leave. If the framing wasn't ready, or a gap shows up after the drywall goes on, that's somebody else's problem. Austin Painting & Drywall doesn't work that way. Insulation is one trade in a full interior sequence: framing, insulation, drywall, and paint. The crew that fills the cavity built the wall it goes into and hangs the board that covers it. When the same team owns every layer, nobody leaves a gap for the next trade to deal with.
Travis Hawk started the company in 2018 after a decade working as an insurance adjuster. That background taught him exactly what happens when insulation is skipped, compressed, or installed with voids: energy claims, moisture damage, and tenant disputes that cost the building owner more than the insulation would have. The company was built around the trades that finish commercial interiors, from the studs to the final coat of paint, with insulation handled in-house instead of pushed to a sub who's gone before the drywall crew arrives.
Austin Painting & Drywall covers Travis and Williamson counties for commercial insulation projects. The project manager assigned to your job stays on it from framing through final walkthrough.
proudly local
Insulating Commercial Buildings Across the Austin Metro
Central Texas runs hot for eight months a year, and commercial buildings without proper insulation spend more on cooling than they should. Older buildings and spaces that were built with minimum-code insulation feel the difference every time the utility bill arrives. Office parks and mixed-use buildings in Allandale need cavity insulation upgrades as tenants turn over and new build-outs bring the walls up to current energy code. Growing commercial corridors in Barton Creek have medical suites and professional offices where acoustic insulation matters as much as thermal performance. And new construction filling in along the 183 corridor in Leander needs insulation installed right the first time so the building performs from day one.
Austin Painting & Drywall covers Travis and Williamson counties for commercial insulation. If your building is in the metro and you're not sure about coverage, call (512) 993-0948 and the project manager will confirm and schedule a site visit.
warranty
A Written Warranty That Covers What's Hidden Inside the Wall
Insulation sits behind the drywall where nobody sees it. If it’s done right, you never think about it again. If it’s done wrong, you feel it in the utility bill and hear it through the walls. Austin Painting & Drywall puts the warranty terms in writing before the project starts, and you keep that document. Warranty service starts with your call: if a covered issue shows up, call (512) 993-0948.
3 yr
On paint applied to the project’s interior and exterior surfaces.
2 yr
On new drywall hung and finished during the project.
2+ yr
Workmanship guarantee covering insulation, framing, drywall, and paint.
Frequently Asked Questions About Commercial Insulation in Austin TX
Ready for Commercial Insulation in Austin TX That's Done Right Before the Wall Closes?
Your insulation project starts with one site visit and one written scope. Call (512) 993-0948 or fill out the online form with your building details, and a project manager will meet you on site to review the cavities, assemblies, and every surface that needs insulation.
